FIS150W-VIN9-36VDC-OP12VDC
150 W DC-DC Power
FEATURES:
- Input – 1 : 4 Input Range
- No Minimum Load Requirement
- Fully Protected – OVP, OTP, OCP and UVLO
- Fixed Switching Frequency Provides Predictable EMI.
- Can be used in Railway, Defence, Industry, Automation
- Design to meet MIL-STD-461E.CE102, CS115, CS116
INPUT SPECIFICATIONS:
- Input Voltage Range : 9- 36 VDC
- Input Current : 9.6 Amp (Full Load)
- Efficiency : 85 % (Typ)
- UVLO : < 9 V
- OVP : ~ 50 V
- Enable Function : Positive Logic
- Built in EMI Filter meets MIL-STD-461E CE102, CS115, CS116
GENERAL SPECIFICATIONS:
- Operating Case Temperature : – 30 oC to 85oC
- Storage Temperature : – 40 oC to 105oC
- Isolation Voltage (Input to Output) : 2250 VDC
- Isolation Resistance (Input to Output) : 100 M Ω
- Isolation Capacitance (Input to Output) : 1500 pF
- Humidity (non-condensing) : 5 – 95 %
- Cooling : Conduction
- Calculated MTBF2 : ~ 1.1MHR
OUTPUT SPECIFICATIONS:
- Output Voltage : 12 VDC Nominal
- Trimming Output Voltage : ± 5.0%
- Output Current & Power : 12.5 A & 150 W
- Line Regulation : ± 0.5%
- Load Regulation : ± 0.5 %
- Minimum Load : 0 %
- Output Ripple
& Noise Voltage1 : 65 mVpk-pk
- OVP : 120 % (Typ)
- OCP : 120 % Typ (Hiccup mode)
- OTP : 110 o C
MECHANICAL SPECIFICATIONS:
- Dimension : 117 X 45 X 27.2 mm
- Weight : ~ 100 g
- Input Connector3 : J1(MPN- 0430450800)
- Output Connector4 : J2 (MPN- 0430450800)
- Drop Test : MIL-STD-810F
- Bump & Vibration : MIL-STD-810F
- Shock : MIL-STD-810F
| Pin No | Input Connector | Output Connector | ||
| 1 | +VIN | 9- 36V | +VOUT | 12 V |
| 2 | +VIN | +VOUT | ||
| 3 | +VIN | +VOUT | ||
| 4 | NC | +VOUT | ||
| 5 | EN | On Request | -VOUT | GND |
| 6 | -VIN | GND | -VOUT | |
| 7 | -VIN | -VOUT | ||
| 8 | -VIN | -VOUT | ||
NOTES:
- Bandwidth 20MHz and with suitable capacitor to compensate cable pick-ups.
- Bellcore- TR-322 @50 oC G.B
- Input Mating Connector: MPN-0430250800
- Output Mating Connector: MPN-0430250800
